Programming infos:

Q: Is Mpxplay opensource? May I get it?
A: You can download the source of Mpxplay from my homepage. 
   If you need a Watcom C v11c compiler (to compile Mpxplay), you can find it 
   on http://www.openwatcom.org site.

Q: I would like to write my own MP3 Player. Do you have any tips, or know any
   sites where I can download sample codes or any mpeg documents?
A: You can find some usable freeware mp3 decoder sources on the net:
    - Freeamp (www.freeamp.org)
    - MPG123  (www.mpg123.de)
    - OpenCP  (www.cubic.org/player)
    - AMP11   (http://www.ph.tum.de/~nbeisert/amp11.html)
   Ogg Vorbis tools and sources:
    - www.xiph.org
   and some other usable sources on
    - www.programmersheaven.com

Mpxplay won't start:

Q: I get '[PMODE/W]: Not Enough Memory Available' error message, 
   or other (XMS/conventional) memory allocation errors when I start Mpxplay.

A: 1. In some cases (ie: DOS 7.x & SB Live) the PMODE/W extender cannot work.
      I made a DOS/4GW version too (commented with 'for MS-DOS 7.x users'), 
      you can download it from my homepage (or try the DOS/32 version).
   2. You have not enough free XMS memory. 
      Mpxplay requires min. 3-4 Mb XMS and 200-300 kbyte conventional memory.

Q: I get 'Soundcard init failed' message when I start Mpxplay.
A: 1.Check the 'supported soundcards' list in the readme.txt, 
     maybe your card is not there...
   2.Try the -sct option to autodetect your card and to get the correct settings.

Sound quality problems:

Q: Will your mp3 player give me the same sound quality as Winamp or another
   win32 product?
A: I think so there isn't too much sound quality difference between Mpxplay
   and other players.
   (I know the Sonique is better, but try to use it on a 486 CPU ...)
   Maybe the problem is your sound card, because if Mpxplay detects your
   card as SBpro, then it will not give good (CD) quality (only 22khz with 8 bit).

LFN problems:

Q: How can I use LFNs (long filenames) with your program?
A: 1. Mpxplay can support LFNs under Win9x through a (windows) software 
      interrupt (API).
   2. Under DOS, you have to use an LFN emulator (witch emulates this API function).
      Only one program can do this: DOSLFN
      You can download it: http://www-user.tu-chemnitz.de/~heha/hs_freeware/freew.html
      Please don't ask about this program... I can't help...
      I know, this program has a limited functionality, 
      but I hope the developer will implement the missing functions...
      (ie: it doesn't support some type of LFN-CDs (LFN CD modes), 
       and it seems it doesn't work under DOS 6.xx (only under 7.xx))
   3. Don't forget to set the UseLFN=1 in the mpxplay.ini (enabled by default)

Q: I wrote a CD with long filenames and directories, I can use it under
   Windows, but I can't read (open) the directories and files under DOS
   (with Mpxplay nor with any other DOS programs).
A: 1. I think so you wrote the CD in JOLIET or in a similar LFN mode.
      If you use CDRWIN (cd-writer software) and you enable 'DOS compatibility mode'
      in the program, you will able to use the CD under DOS too (of course you'll
      see the long filenames in LONGFI~1.MP3 format).
   2. Use SHSUCDX.EXE, an alternative cd-driver instead of MSCDEX.EXE

Audio-CD problems:

Q: Why don't you implement a normal CD player instead of the real-time CD-ripper?
A  1. It was easier to implement (I can handle a CD-track like a normal file)
   2. On this way, you can use CROSSFADE, AUTOVOLUME, SPEED CONTROL and
      SURROUND on AUDIO CD tracks. You couldn't do these in a normal
      CD audio player.

   In fact, the CDW doesn't work on every CD-ROMs (especially on old ones).
   (if the CD-reading is buggy, try the CDWcontrol=1 setting in mpxplay.ini)
   (smartdrv also can cause problems, so don't use it for CDW playing)

Speed problems:

Q: I have a DX4-100, you wrote in the readme.txt, this CPU is enough
   to play MP3s, but Mpxplay can't play properly on it...
A: 1. Of course it depends on the other parts of your computer too,
      maybe your hard disk or/and CD is slow (or you use a non-Intel CPU).
      If you don't use SMARTDRV, NCACHE or other similar disk cache softwares,
      try to add this lines to your config.sys file:

      BUFFERS=63,8
      FCBS=32

   2. disable (don't use) the extra functions: autovolume, surround and
      spectrum analiser

Q: 1. I have a 386-25 computer. Could you optimize your player that runs
      on my pc too?
   2. I have a 386-DX40 and I use your program to convert mp3 files to wav.
      And sometimes it makes an empty (or zero-length) wav file.
A: My program is optimized (compiled) for pentium processor, but it can
   run on a 486 CPU too. But it CAN'T on a 386, nor with external FPU.
   (sometimes it may works, but usually: NOT)
   And the speed... Maybe with full asm decoding I can reach that my program
   runs on a 486 DX2-66, but it never will be faster.
   (btw. higher bitrates (320kbit) use more CPU than the lower ones (128kbit))

Prebuffer problems on CD-ROMs:

Q: I use the -bp option and my CD-ROM usually stops at the end of the songs, and
   there's too much pause between the songs or/and the crossfade is not perfect.
   (the program playing the sound from the buffer, and it doesn't read the CD,
    because of this some CD-ROMs automatically stops after 15-20 seconds).
   How can I solve this problem?
A: Reduce the size of prebuffer with the -bbn option (ie: -bbn 10)(default:32)

LCD-display:

Q: I would like to use an LCD display for Mpxplay. How can I do this?
A: You can find some hardware infos in the source : DISPLAY\LCD.C (from mpxsrc.zip).
   You can find more informations in the MOREINFO.TXT too.
   You can enable/configure the LCD in the MPXPLAY.INI file.
   Otherwise I haven't got LCD, because of this I can't help too much
   if you have problems using an LCD (hardware problems)...

Other:

Q: Mpxplay sometimes cuts the end of the songs (losing 4-5 seconds).
   Is there any way to play the song completly?
A: You can disable this function (cut) with the '-sl 0' command line option
   or with the SoundLimit=0 setting (in the mpxplay.ini).
   (or try a low value: 1-5)

Q: I would like to use an external (TSR) program to control Mpxplay,
   but it doesn't work. Why?
A: I don't use the 'normal' BIOS or DOS routines to read keyboard,
   I wrote my own low-level functions. You can find them in the newfunc.c (pds_kbhit,pds_extgetch,pds_pushkey)
   If you write a TSR for Mpxplay, use this way to control my program.

Q: I can copy CD tracks into a wav file, but how can I convert them directly
   into MP3s with Mpxplay?
A: You cannot do this... Mpxplay is a player, not an encoder...
